Felting - Mastering the Art of Wet Felting

Has your wet felting been less than satisfactory? Or maybe you haven't tried it yet and want to make it right the first time. The following tips will help you specialist wet felting wool.

Fiber Choice

RC Helicopter

First, you need to select the right wool for felting. Some fibers don't felt well at all. Try felting alpaca wool or merino wool. A tiny more expensive but the finer fibers felt up very nicely. Other medium sheeps' fibers felt well, too.

When you select your wool, be sure the staples are of uniform length. Your concluded scheme will be less hairy and shed less. 3 inches is a good length.

Test the fiber by felting a small sample to see if it will be satisfactory for your completed project.

Layering

Lay your wool at 90 degrees to the last layer. 5-6 thin layers is unquestionably better than 2-3 thick layers. Your layers will be more even and your fibers will felt better.

Check your layers to see that there are no thin spots. This one inspection will go a long way to development sure your layers are even and will prevent a lot of problems in your concluded project. You'll have to toss the felt you just made if there are too many thin spots or waste a lot of time going back over it with a felting needle and fiber to fill in thin areas. Save yourself some time and do it right the first time.

Felting Stage

Use the screen and toady formula of felting. It holds the fibers in place and keeps the fibers from sticking to your hands. It unquestionably helps make nicer even felt.

Watch the number of soap and water you use. Too much water and your fibers float away from each other instead of felting. If water pools in the middle of your fingers when you press down, then you have used too much. This is where the toady unquestionably helps. You can better operate the number of water you use and keep it to a minimum.

Is more soap better? Nope. You will create bubbles that separate your fibers so they can not lock together and felt. Really, you only need a small number of soap.

Don't press too hard at first. Gradually adding pressure will make your fibers felt better and create a more even felted wool.

Keep your water as hot as possible. If the water gets cold, add more hot water. If this is going to cause a question with too much water, soak up some water with a towel before adding anymore to your fibers.

Fulling Stage

This is were you will make or break the felt you just made. During fulling you are removing air from in the middle of the fibers development them tighter fitting. If you don't tighten the fibers, your scheme will pill and shed until it falls apart.

Which fulling formula is best? It's not the method, it's either you unblemished the fulling process. So just pick what the best formula is for you. How do you know when it is done fulling? If you pull on your felt and it stretches, it is not done. You must felt it until it is firm.

Keep your water warm while fulling. If you can, full in your sink or bathtub so you have access to hot water During the fulling process.

Finishing

When you have concluded the fulling process you need to wholly rinse out the soap with cool water. Leaving soap in could damage the fibers development them brittle or they may even disintegrate over time.

Just Gradually squeeze out excess water. Never wring. To speed up drying time, roll your felt in a towel to take off more water.

Let dry wholly before adding anything else. Wool has an exquisite memory. It will hold anything shape you dry it in. A full 24 hours is needed for your wool to wholly dry.

Now that you have mastered the art of wet felting, your projects will be high quality. Friends and family will love receiving your felted gifts or, if selling your felt, you'll have satisfied customers. Now go on and create great felt!

Felting - Mastering the Art of Wet Felting

Thanks To : My Product Unlocked cell phones Top rated HDMI Cables Class 10 SDHC